Guangdong LongHong Electrical Equipment Co.,Ltd

the reason:
A) There is air in the fuel system
B) Fuel system leakage or blockage
C) The engine drive is engaged with the engine
D) fuel filter blockage or due to low temperature caused by fuel freeze
E) Suction line blocked
F) Use the wrong type or type of fuel
G) There is water in the fuel
H) Preheating is insufficient
I) The intake system is blocked
J) The pressure pipe is damaged

Approach:
A) Discharge air from fuel, tighten tubing fitting and filter
B) Check the fuel tank vertical pipe
C) Disengage the engine drive
D) replace the fuel filter, the installation of fuel heaters
E) Clean the pipeline
F) with a temporary fuel tank to start the engine to determine
G) Replace the fuel and install the oil-water separator
H) Check the user's manual / check the fuse, if necessary press the button to reset, check the wire / interlock button and the preheat relay. If you need to replace the preheat element, contact an authorized person
I) Clean up the intake line
J) Install a new pressure tube

Foshan Generator --- Foshan Longhong Electromechanical Equipment Co., Ltd